|
|
Monitors, Monitor/receivers, Quads & Multiplexers
|
Whenever
you have more than 1 camera and you wish to view all cameras
simultaneously, then you need a quad or muliplexer. A quad is
less cost and only allows 4 cameras to be viewed on 1 screen.
A dual page quad allow for alternating of two screens with 4
cameras per page or screen.
A mulitiplexer can allow up to 16 cameras to be viewed on same
screen simultaneously, with many other features as well. |
|
|
Full
Duplex Multiplexer
16 channel!
Features
- Compatible
with color and B/W video cameras or other NTSC/EIA (PAL/CCIR)
standard compatible video sources. Video synchronization
is not required. Selectable termination
- Full
duplex operation allows video recording while viewing live
video or video playback.
- Dynamic
Time Division multiplexing allocates camera recording time
based upon picture motion content.
- Motion
sensing for each camera input is programmable via a 192
motion target grid (16 wide by 12 high)
- Independent
Main and Call Monitor outputs allow simultaneous multicamera
and full screen viewing.
- Video
inputs and outputs provided for both standard and Super
VHS video cassette recorders.
|
- On-screen
display includes date, time, alarm status, video loss and
10-character camera titles.
- Live
or tape playback views includes: full-screen with 2x zoom,
Picture-in-Picture (PIP), 2x2, 3x3, and 4x4.
- SELECT
feature allows any camera to be assigned any window format.
- Outstanding
picture quality provided by a 512 x 464 (512 x 512 PAL)
pixel display with 256 gray levels and 16 million colors.
- On-screen
menus simplify system setup.
- Alarm
features include one contact closure and TTL/CMOS sensitive
alarm input for each camera, alarm hold input and alarm
output. Alarm input polarity is selectable.
- Nonvolatile
program memory protects all programmable features against
power loss.
|
Specs
| Camera
Inputs/Output: |
1.0
V p-p, 75 Ohms |
| VCR
Inputs/Output: Composite |
1.0
V p-p, 75 Ohms |
| VCR
Inputs/Output: S-video: |
Luma
1.0 V p-p, 75 Ohms Chroma (burst) 285m V p-p, 75 Ohms |
| Camera
Alarm Input: |
One
input per camera. Activated by contact closure or TTL/CMOS signal.
Polarity Selectable. |
| Alarm
Hold Input: |
+5
to +15 VDC or TTL/CMOS Active High signal. |
| Alarm
Duration: |
4
second default. Menu selectable from 2 to 999 seconds. |
| Alarm
Output: |
Normally
open (NO) and normally close (NC) contacts with shared common:
2.0 A at 30 VDC (resistive only) 1.0 A at 125 VAC (resistive
only) |
| Gray
Shades: |
256
(8 bits) |
| Full
Screen Format (pixels): |
512
x 464 (512 x 512 PAL) |
| Power: |
2.1
mm pin-type female. Power Input. |
| Remote: |
DB25-S.
Remote control via contact closure, TTL/CMOS or RS-232 data. |
|
SSC-MLTPX16----16
channel B&W/Color multiplexer $599.55
|
video monitor,
multiplexer, video surveillance equipment